Cullman Cabinet & Supply Company, Inc. manufactures and ships UNFINISHED wood products primarily within the Southeast United States. ONCE OUR PRODUCTS ARE RECEIVED, IT IS IMPOSSIBLE FOR US TO MONITOR THE CONDITIONS UNDER WHICH THEY ARE KEPT.
Claims on any order or material discrepancies must be made within three (3) days after receipt of order prior to HINGING, HANGING, or FINISHING.
Doors are not to be returned without prior written approval of Cullman Cabinet. After approval, doors must be returned in their original condition to the offices of Cullman Cabinet for inspection. Any item that has been hinged, hung, or finished, shows signs of exposure to moisture, heat or sun, shows signs of job site neglect, or is modified in any way shall be deemed accepted by the buyer and voids any warranty.
If our product is handled in accordance with our recommended guidelines, most problems will be minimized.
Remember, you are dealing with an unfinished wood product that will warp, twist, or crack within 24 hours if not treated or handled properly.
Mitered doors allow a .010” joint gap 1” from the inside bead.
Mitered doors are not warranted against joint separations that occur as a result of high humidity or moisture conditions. Water based paints are not recommend on mitered profiles.
Limited Warranty covers material only. Material will be reworked, replaced or credited, whichever is feasible.
This warranty is made by the manufacturer and no person is authorized to make any other warranty or representation either expressed or implied on the Cullman Cabinet’s behalf.
Products must be inspected upon receipt. Our guarantee covers the replacement of doors and drawer fronts in an unfinished state and in good condition, as originally delivered F.O.B. our factory. Any variation from our normal construction specifications is not guaranteed, i.e., reducing the thickness of the panel or frame.
A warp or twist of 3/16th of an inch or less is not considered a defect. A twist is measured by placing the face of the door against a true plane surface.
Dimensions are within 1/16” (+ or -).
Material free from splits in open joints.
Variance in color is not considered a defect.
Doors over 46” in height will automatically receive a horizontal center rail unless otherwise noted.
Doors over 46” in height and 23” in width will not be warranted against warping.
Cullman Cabinet & Supply Company, Inc. will not be held responsible for delays caused by factors beyond our control (i.e., obstruction or blockage of usual routes of transportation, unavoidable accidents, riots, natural disasters, vehicle shortages, prevention of labor, power shortages or lack of materials.) There are no other warranties of any other kind expressed or implied.